| TECHNICAL FEATURES : | ||
|---|---|---|
| - | Traceability to Recognized Standards | |
| - | Pressure sensing is accomplished via precision pressure transducers for accuracy and stability | |
| - | Temperature sensing is accomplished via precision thermistors for accuracy and stability | |
| - | Software customizable to customer requirements
|
|
| OPTIONS: | |
|---|---|
| - | Photo Eye Sensor |
| - | Manual Start/Stop Thumb Switch |
| - | ID Drive Pulser |
| - | Electronic Module Pulse Input Adapter |
| - | Bar Code Reader |
| - | Laptop Computer |
| - | MTR-II Meter Shop Management Software Designed to meet Customer Specifications |
| - | Modem for Remote Access |
| TECHNICAL DATA : | ||
|---|---|---|
| Meter Type Tested: | - | Rotary, large diaphragm, ultrasonic & turbine (based on customer requirements) |
| Blower Capacity: | - | 18,000 CFH (Determined by Master Meters) |
| Test Range: | - | Determined by Master Meters |
| Operating Temperatue Range: | - | 32°F to 140°F (0°C to 60°C) |
| Temperature Effect:: | - | Compensated |
| Pressure Effect: | - | Compensated |
| Humidity Effect: | - | Compensation Not Required |
| Humidity Range: | - | 5 to 95% Non-Condensing |
| Accuracy: | - | 0.2% to 0.4% (Based on Configuration and Master Meter) |
| Repeatability: | - | 0.15% |
| Automatic Leak Test Cycle | - | User selects sensitivity and duration of the leak test |
| Test Sequence: | - | User controlled, User selectable |
| Test Results: | - | Displayed on Laptop Computer |
| - | (%Proof, %Accuracy, %Error, %Correction) | |
| Power Input: | - | 120/240 VAC ±10%, 50/60 Hz |
| Test Time: | - | Determined by Volume & Flow Rate of Meter Under Test |
| Test Cycle: | - | User Controls Blower Speed to Maintain Selected Flow Rate |
| - | Automatically Starts and Stops Test Cycle | |
| Low Maintenance | ||
| Mobile Test Cart | ||